Coat appearance：the primer is used to treat building bottom layer.
Features：matte and white
belonging to environmental green product
good adhesive force
effectively prevent reinforced concrete carbonizing
Excellent construction performance
Good alkali resistance
Provide covering power
Construction methods：roller, brush and spray coating
Application instructions：construction temperature：above 5℃
Recoating time：above 2 hours /25℃
Dilution status：at most 10%-15% of water（W：W）use after stirring uniformly
Paint consumption：theoretical value: about 10m2/L/layer
Storage requirements：stored in 0-35℃ dry and cool conditions
Application range：cement wall surface, brick structure, asbestos board, timber surface and plaster board
Construction requirements: water addition amount should be the same for every bucket; the coat should be thin and uniform
Performance index：status in the container：no hard lump and uniform status
Alkali resistance：24h
Scrubbing resistance;≥1000 times
Basic requirements: basic layer must be dry, no oil, grease and other attaching substances. For new wall, recommend brushing VD-6000 seal primer and coating finishing coat twice. Use high pressure water to wash for loose paint film or use the scraper to remove. The temperature of wall body is below 10%; PH≤10
Executive standard：GB/T9755-2001
Shelf life ：12 months